Epoxy Mortar Bicomponent “Emex”
Epoxy Mortar Bicomponent “Emex”
Epoxy Mortar Bicomponent “Emex”
  • Pardoseala epoxidica autonivelanta “Emex”
  • Pardoseala poliuretanica “Emex”
  • Vopsea poliuretanica bicomponenta “Emex”
  • Pardoseala antiderapanta poliuretanica “Emex”
  • Vopsea epoxidica bicomponenta “Emex”
Certificare ISO Vopseluri


Premium quality

     According to the labels attached to navigation menu, at the bottom of this presentation you will find the instructions and complete technical data of the product.

Technical Data


     The “Emex” Bicomponent Epoxy Mortar (also called epoxy screed) is a Fond mortar bicomponentprofessional product based on epoxy resins without solvents, pigments and special additives, specially designed for equalizing the uneven horizontal surfaces in order to prepare for economical application of self-leveling synthetic paving. The product is especially recommended for old screeds, with a pronounced degree of damage, or where there are small holes for filling. The product is distinguished by stability in acidic or alkaline chemical environments and high thermal variations.

Main characteristics:

  1. Excellent adherence to concrete;
  2. Stops deterioration of the support;
  3. Excellent hardness;
  4. Great durability;
  5. Excellent resistance to wear;
  6. High resistance to corrosive agents;
  7. Equalizes the support surfaces;
  8. Very good compatibility with the final synthetic paving;
  9. High resistance to hydrocarbons, acid or alkaline environments.
Technical Data

Utilization Domains

     The “Emex” Bicomponent Epoxy Mortar is intended for professional use filling of Fond pardoseala antiderapantathe voids and equalizing the concrete surfaces for the application of synthetic self-leveling paving, with excellent and lasting resistance characteristics, perfectly compatible with the epoxy or polyurethane screeds.

     It is used with excellent results in civil and industrial constructions, for economic equalization, without self-leveling, or repairing of all old paving with a pronounced degree of damage, or where there are small filling holes, prior to application of synthetic paving, with final aspect which may vary depending on the way of application. It can also be used on the supports with a high slope in areas of wear (intense traffic).

     For the correct preparation of the surfaces is required the mechanical cleaning for removing any spot or traces of contaminants and covering with “Emex” Epoxy Impregnation Base Coat. The application is made by founding and stretching with trowel or ravels, followed according to manufacturer’s recommendations by venting with needle rollers.

The Epoxy Bicomponent Mortar is used for civil and industrial constructions, prior to application of the bicomponent paving, without self-leveling, especially in deteriorated or high wear areas, exposed to chemical environments or for special protection such as: plant yards, motor services, industrial warehouses, hospitals, laboratories, schools, restaurants kitchens, canteens, bakeries, etc., and especially in areas where the risk of accidental slip exists (auto ramps, and so on).

     To obtain maximum performance read carefully the Application Instructions and Technical Data Sheet, available in the menu below.

  • This paint may be flammable
  • This paint could be harmful

Tehnical Features

  • Characteristic
  • Appearance
  • Density
  • Mix ratio
  • Pot-life at 23 °C
  • Consumption
  • Appearance
  • Drying surface
  • Drying in depth
  • Water resistant
  • UV resistant
  • U/M
  • -
  • %
  • gr.
  • min.
  • kg/sqm/st.
  • Pellicle
  • -
  • hours
  • hours
  • 500 hours
  • 30 hours
  • Characteristic Value
  • homogene
  • 1,80 - 2,00
  • 1000 : 200
  • cca. 30
  • 1,7 - 2,2
  • according application
  • 12
  • 24
  • Good, no changes
  • No chromatic changes
Technical Data
Data Sheet: Epoxy Mortar bicomponent “Emex”
  • Paint application instructions
    Read datasheet
  • Corrosion resistant paint
    Corrosion resistant
  • Vopsea rezistenta la apa
    Resistant to Water
  • Paint preparing
    Will be mixed
  • Protection from mold and fungus
    Mold Resistant
  • Vopsea rezistenta la hidrocarburi
    Resistant to Hydrocarbons
  • Cleaning of the surface for painting
    Clean the surface
  • Weather resistant paint
    Weather resistant
  • Vopsea rezistenta la abraziune
    Abrasion Resistance
  • Paint drying time
    Drying about 24 h
  • Steam resistant paint
    Steam resistant
  • Paint protected against UV
    UV resistant

     The symbols below will show both the some principal characteristics of the product as well primary use or safety instructions.

     For detailed instructions, read Technical Sheet.

Epoxy Mortar
Pardoseli antiderapante
Sapa epoxidica
Epoxidica pardoseala
Symbols - Instructions
Pardoseala epoxi

Pardoseli epoxidice

Other products in the same category
Epoxy Mortar
Pardoseli industriale
Reparatii epoxidice
Chit epoxidic

Grund de Amorsare pentru vopsele epoxidice “Emex”

Base Coat for Priming
Surface preparation before epoxy paving.

Visit page...

     Tags: Epoxy mortar, Epoxy screed, Skidproof paving, Epoxy paving