“NEOMATT” ECONOMICAL EXTERIOR EMULSION PAINT

    At the bottom of this presentation, you will find the instructions and complete technical data of the product, according to label attached to the navigation menu.

Description

     The “Neomatt” Economical Exterior Emulsion Paint is a hydro-soluble of dispersion product based on Latex acrylic polymers, specific additives and fillers, for finishing of the exterior surfaces with high degree of white, good adherence to the support, good display and matted finish. Given a proper preparation of the support this type of paint ensures characteristics of good film, at cheap prices and effective power.

     It is very easy to apply and it is fabricated in any shade according to the NCS color card, or it can be colored afterwards using coloring pastes.

Main characteristics:

1. Great adherence to support;
2. Good lay on;
3. High degree of white;
4. Matte aspect;
5. Low drying time;
6. Easy application and maintenance;
7. Washability;
8. Coloring in any shade;
9. Vapor permeability and water impermeability.

Utilization Domains

     The “Neomatt” Economical Exterior Emulsion Paint is intended for protection and decorative finishing of the exterior surfaces of civil and industrial buildings, new or old, of different structures.

     Given a proper preparation of the support this emulsion paint has a good resistence at weather, moisture, etc. It is not indicated for areas exposed directly to excess dirt, dust, fats or abrasion (eg curbs, railings on the roads, lanes, etc. .). It is recommended for areas with average exposure, both civil and industrial buildings.

     It is used as final layer for covering the following types of surfaces with mineral base: concrete, masonry, lime and cement plaster, lime or gypsum plasters and polishing plaster coats, new or old plaster based on binding material, gypsum board, absorbent mineral conglomerates of any type, old organic or mineral paintings, dry, compact and absorbent paintings.

     It can also be successfully used on other surfaces such as OSB, MDF, PAL, ply, panel, linen, cardboard, asbestos cement, expended polystyrene.

     Areas affected by mold or fungi will be cleaned in advance with “Emex” Forte Sanitizer.

     It is necessary the previously preparation of the new surfaces prior to applying paint. Mandatory, the new surfaces will be prepared with “Emex” Wall Primer or with “Emex” Anti Mold Primer .

     To obtain maximum performance read carefully the Application Instructions and Technical Data Sheet, available in the menu below.

Tehnical Features